Yes, they can, but quá trình đông cứng is avoidable. It happens in two ways: 1) too much UV energy is used or 2) the nail lớp phủ is exposed to significant levels of UV energy after leaving the salon. In other words, Gel tia cực tím lớp phủ móng tay can be over-cured in the short term and/or long term.
Too Much UV Energy
When a nail coating is exposed to too much UV energy, it will cure too quickly. This can lead to sự cố dịch vụ, nail damage, and even nail infections. How? All UV gel nail coatings release small amounts of heat when they cure. This is why some clients feel a slight warming. When over-cured, the same UV gel coating may become very hot, resulting in a painful giường móng tay burning sensation.
For example, a layer of nail coating designed to be correctly cured for two minutes under a fluorescent-style UV đèn làm móng can heat up quickly when cured under a LED-style UV nail lamp, heating the nail bed in excess of 120oF (48oC), which can result in painful burns that may lead to tấm móng tay separation (bong móng). Onycholysis allows vi khuẩn easy access the nail bed, making infections easier to occur. Over-chữa bệnh can make nail coatings more difficult to remove, which can lead to nail damage. Why? Surface white spots often occur when products are scraped from the nail plate with too much force. When nail coatings are more difficult to remove, scraping damage is more likely.
UV Exposure After the Service
UV gel nail coatings can also be affected by tanning beds and natural sunlight. Poorly formulated or incorrectly manufactured nail coating products are more likely to be giòn, discolor, crack, break or lift (i.e. excessive cạnh miễn phí chipping) and it’s often due to continued UV exposure. Certain ingredients in lower-quality nail coatings can turn dark brown or yellow with continued UV exposure. Long-term UV exposure can cause some nail coatings to lose their flexibility and become more brittle, Do It Right- Never Accept Substitutes!
How can thợ làm móng avoid over-curing nail coatings? One of the best ways is to always use the UV nail lamp specifically designed for the UV nail coating product of your choice. Follow the manufacturer’s instructions and heed all warnings.
Properly maintaining the UV nail lamp is of great importance. Replaceable UV bulbs must be changed on a regular basis to ensure proper curing. Heavily used UV nail lamps may need bulb replacement every three months; moderate use may require bulb replacement twice per year. It is VERY important to use the replacement bulbs supplied by the UV gel product/lamp manufacturer. NEVER substitute for another UV bulb type or brand. Incorrect bulb use results in improper curing and potential hazard to the client’s skin as some bulbs are NOT intended for use with UV nail lamps.
High-quality UV bulbs may cost more, but in the long run, trying to save money by buying less expensive bulbs is likely to cost far more than it saves.
Read more on UV gels here:
Heat Spikes
Gel UV đánh bóng co ngót
Vietnamese 
English 
Portuguese 
Spanish 