Lớn nhất (và tốt nhất!) Thế giới Trung tâm kiến thức làm móng

Làm sao chúng ta có thể giúp đỡ?

Tìm kiếm câu trả lời bạn đang tìm kiếm.

Hệ thống sợi thủy tinh

Bạn đang ở đây:

1.1k Views

This is a three-part component system that uses a fabric mesh, resin and a resin activator to create artificial lớp phủ móng tay.

What's in the fibreglass system?

Fabric Mesh

The fabric in this system provides a reinforced kết cấu, acting like the polyme beads in the liquid đơn phân Và bột polyme system, blocking cracks from spreading. Typically the fabric mesh is fibreglass or natural silk mesh. There are slight differences between the two, fibreglass doesn’t absorb the resin as well as the silk which is why silk mesh is less visible. Fibreglass is slightly stronger as it stays as fibreglass and does not soak up the resin. The fabric mesh is needed as the resin when it polymerises does not form cross-links to other polymer chains, meaning it is slightly weaker on its own, which is why the mesh is used to provide additional strength and durability.

Resin

Although referred to as resin, this component is actually a cyanoacrylate. There are various types on the market, some are thick gel, others thinner. Cyanoacrylate bonds strongly with the tấm móng tay and is also used as nail adhesives and for adding đầu móng tay to nails. This family of acrylat sự chữa bệnh when exposed to moisture in the air.

Cyanoacrylates themselves rarely cause dị ứng reactions however there are additional hóa chất within their formulations that may cause adverse skin reactions.

The resin breaks down quickly in water and in axeton, due to its chemical structure.

Resin Activator

As mentioned above, the resin starts polymerising when exposed to moisture in the air. An activator is used to speed up the process and to ensure a chữa bệnh đúng cách, either a spray or chải-on is used.  When using a spray be careful and cautious, normally only a tiny amount of activator is needed; too much can cause a nhiệt độ tăng đột biến.  A brush on activator produces a slower but more controllable cure.

Precautions and issues with the fibreglass system

This system is not as strong as the other systems but can still produce great results especially on shorter nails or with clients who are not too hard on their nails.  

As it is a different formulation to the other systems it may be suitable for clients who have developed a sensitivity to other systems. 

Overuse of the activator spray can cause a painful heat spike; usually only a very short spray 30cm from the nail is need.

Các thuật ngữ liên quan:
Được tạo ra vào
Cập nhật lần cuối vào
quaKevin Nicholls
Bằng cấp chuyên nghiệp NailKnowledge
kiến thức về móng tay của bạn có đủ không
viVietnamese
en_GBEnglish pt_BRPortuguese es_ESSpanish viVietnamese
Giỏ hàng