Lớn nhất (và tốt nhất!) Thế giới Trung tâm kiến thức làm móng

Làm sao chúng ta có thể giúp đỡ?

Tìm kiếm câu trả lời bạn đang tìm kiếm.

Liệu đắp gel dưới móng đục có gây nguy hiểm cho móng không?

Bạn đang ở đây:

7 Lượt xem

Câu hỏi: I’ve noticed that some people are using opaque, full-coverage nails with gel products like base gel or builder in a bottle. I’ve informed them that the opaqueness of these nails might prevent proper chữa bệnh of the gel, leaving uncured gel underneath. I believe this is correct, but I’m struggling to find concrete information to support this claim, aside from the general knowledge that light must penetrate the gel layers for a complete cure. Can you help clarify this for me?

Expert: Of course! You’ve raised an important concern about the use of opaque, full-coverage nails in conjunction with gel products. Your understanding is indeed correct, and I can provide you with some insights into this matter.

Challenges of Using Opaque Nails with Gel Products

When it comes to gel products, particularly those that require UV or LED curing, the key factor is proper exposure to the curing light. Opaque or fully covered nails can pose a challenge because they act as a barrier, blocking the UV or LED light from reaching the gel product underneath. As a result, the gel may not cure properly, leading to several potential issues.

It is also important to remember that a gel lớp phủ is solid at only 50% of its required cure time, so do not fall into a trap of thinking because it appears to be solid, and there is no seeping residue, that a coating is fully cured. Add this to the risk of the opaque tip inhibiting the penetration of the wavelength of light, a thợ làm móng chuyên nghiệp will never be certain that the gel applied beneath is of the correct application thickness and achieved its chữa bệnh đúng cách.

One of the primary concerns is that the gel might not adhere securely to the móng tay tự nhiên when curing is incomplete. This can result in premature nâng, where the gel layer detaches from the nail, leaving room for moisture, vi khuẩn, hoặc nấm to enter. Additionally, incomplete curing can result in weakened nails and may even cause discoloration or vàng ố.

Using Clear Tips and a Double-Cure Approach with Gel Products

To address this challenge, it’s recommended to use clear tips when working with gel products. Clear tips allow the UV or LED light to penetrate and ensure proper curing of the gel. Moreover, you can consider a double-cure approach, which involves curing the gel both before and after attaching the tip. This double-cure method helps confirm that the tip hasn’t obstructed the curing process and ensures a secure and long-lasting bond.

In summary, your concerns are valid, and it’s essential to choose clear tips and adopt a double-cure technique when using gel products to achieve successful and durable nail enhancements.

Câu hỏi thường gặp

Câu hỏi: Why is it important to avoid using opaque nails with gel products?
Trả lời: Proper curing of gel products is crucial for strong and durable nail enhancements. Opaque nails can block UV or LED light, hindering the curing process and potentially leading to issues like premature lifting and weakened nails.

Câu hỏi: What’s the recommended solution for using gel products with opaque nails?
Trả lời: To overcome this challenge, it’s advised to use clear tips when working with gel products. Clear tips allow the curing energy to penetrate, ensuring proper curing. Additionally, employing a double-cure approach, curing both before and after attaching the tip, can ensure that the curing process is not obstructed.

Câu hỏi: Can incomplete curing of gel products lead to nail problems?
Trả lời: Yes, incomplete curing can result in various nail problems, including weakened nails, premature lifting of the gel, and potential discoloration or yellowing. Ensuring proper curing is essential for achieving flawless and long-lasting nail enhancements.

Giỏ hàng
viVietnamese
\n

An individual who is qualified to provide a wide range of nail services.<\/p>\n<\/div>","cmtt_b194e98c35f4b702f309014939ccb864":"

Natural nail<\/div>
natural nails\n

The nail that is produced by the nail matrix and covers the end of the finger or toe.<\/p>\n<\/div>","cmtt_0506a8f91422e69ce467fd3507a8e7a4":"

Proper cure<\/div>
\n

In a salon, when an artificial nail covering has achieved 90 percent polymerisation and has reached its intended strength, containing only very low levels of unreacted monomers, which is considered safe.<\/p>\n<\/div>","cmtt_d95ff256137df5d55882fc6ae81adf69":"

Bacteria<\/div>
Bacteria\n

There are many species of bacteria everywhere in the world. There are bacteria both inside and outside the human body. Many are good for you but some are not. Some can make you ill. A bacteria species that is relatively common for nails is a species of pseudomonas aka \u2018greenies\u2019. The \u2018bad ones\u2019 can be classed as pathogens but nail professionals must use robust hygiene protocols to avoid any type of bacteria infecting their clients.<\/p>\n<\/div>","cmtt_bab817b49fcc46dd1e5a607d9985e51c":"

Yellowing<\/div>
yellow nails\n

Yellowing of the nail refers to visual yellow discolouration of the nail plate. This can be caused through various factors. e.g. Staining from pigmented polishes or foods. It can indicate underlying medical conditions, or conditions such as Psoriasis or Fungal nail infections.<\/p>\n<\/div>","cmtt_3301334d7b41d59c5fe2f5d888d1da1e":"

Coating<\/div>
\n

A coating in nail services terms is any product that is applied to the nail plate<\/a> and leaves a layer of product. It can be traditional nail polish, a strengthening product, a UV gel product, an L&P product.<\/p>\n<\/div>","cmtt_be33e2937f9f182702984fbbe290b775":"

Lifting<\/div>
\n

When adhesion of a nail coating to the nail plate breaks down because the nail coating has reached the end of its lifecycle.
When the nail coating has also been applied to the nail plate but touched the skin, the movement of the nail plate causes a fracture in the coating and water and or oil can get underneath the coating and lift it from the nail plate.
When the client has had some kind of accident \u2013 banged his\/her nail coating and caused it to fracture or break allowing water and or oil to get underneath.
When the nail plate is not properly cleaned or prepared before application then the nail coating will not adhere well to the nail plate and lift away.
It\u2019s important to spot this in time and replace or repair the nail coating to prevent infections from 'Pseudomonas Aeruginosa' or White Superficial Onychomycosis taking hold.<\/p>\n<\/div>","cmtt_6e4b2c42b82604c2f739d01368901b8a":"

Cure \/ Curing<\/div>
\n

This is the term used to describe the polymerization process for the acrylics (whether uv gels or l&p systems) used in nail coatings. A 'proper cure' is what should be achieved which is when, at least, 80% of the coating has been polymerised. Anything less than this is considered to be 'under-cured' and can cause an allergic reaction. \"Over-curing\" would be when the nail coating is cured in a lamp that has a stronger output than what the manufacturer recommends, and it will make the nail coating brittle.<\/p>\n<\/div>","cmtt_4eb428598c1d8f289e6897779124e77d":"